HT12E HT12E[產品打印頁面]

HT12E  HT12E -- 2¹² Series of Encoders

General Description

The  encoders are a series of CMOS LSIs for remote control system applications. HT12E capable of encoding information which consists of N address bits and 12-N data bits. Each address/data input can be set to one of the two logic states. HT12E programmed addresses/data are transmitted together with the header bits via an RF or an infrared transmission medium upon receipt of a trigger signal. HT12E capability to select a TE trigger on the HT12E or a DATA trigger on the HT12Efurther enhances the application flexibility of the HT12E series of encoders. The HT12E additionally provides a 38kHz carrier for infrared systems. 

Features

•    Operating voltage
  - 2.4V~5V for the HT12A
  - 2.4V~12V for the HT12E
•    Low power and high noise immunity CMOS technology
•    Low standby current: 0.1uA (typ.) at V_DD=5V
• HT12A with a 38kHz carrier for infrared transmission medium
•    Minimum transmission word
  - Four words for the HT12E
  - One word for the HT12A
•     Built-in oscillator needs only 5% resistor
•     Data code has positive polarity
•     Minimal external components
•     Pair with Holtek's 2¹² series of decoders
•     18-pin DIP, 20-pin SOP package
• Data Sheet
• Revision History
• 封裝信息
  18-pin DIP 封裝
  20-pin SOP 封裝
• 問答集
• 應用范例
• Selection Guide
• 產品型號索引

H12E_中文PDF(點擊下載)